09.F5.A1A-3D2F KEB COMBIVERT F5 Multi frequency inverter

09.F5.A1A-3D2F KEB COMBIVERT F5 Multi frequency inverter is documented for the KEB COMBIVERT F5 Multi drive system. Its concrete system position is stated from cited facts and marked inference.

Verified system role

Rebuilt from individual evidence

Fresh evidence identifies 09.F5.A1A-3D2F as a KEB COMBIVERT F5 Multi frequency inverter.

The exact-reference listing identifies 09.F5.A1A-3D2F as a KEB COMBIVERT F5 Multi frequency inverter, 400 V three-phase, 1.5 kW and IP20.

Inferred system position: the frequency inverter sits between the controller and motor in the KEB COMBIVERT F5 Multi chain.

Exact reference: 09.F5.A1A-3D2F
Category: Drives / VFD
Evidence checked: 2026-09-11

System role

This section explains what the product does and where it acts in the surrounding system.

Function: The frequency inverter controls motor power and output frequency in the KEB COMBIVERT F5 Multi system.
System position: Inferred system position: the frequency inverter sits between the controller and motor in the KEB COMBIVERT F5 Multi chain.
Upstream / inputs: Upstream input: three-phase mains power and controller commands reach the KEB F5 Multi inverter.
Downstream / outputs: Downstream output: variable motor power and frequency reach the connected motor.
Limitations: Unknown: installation-specific compatibility, firmware, condition, and replacement suitability are not established by the captured sources.

Evidence ledger

Facts, inferences, and unknowns are kept separate.

Facts

The cited source identifies 09.F5.A1A-3D2F as a KEB COMBIVERT F5 Multi frequency inverter.
Confidence: high
- www.radwell.ca — retrieved 2026-09-11; high confidence
The exact-reference listing identifies 09.F5.A1A-3D2F as a KEB COMBIVERT F5 Multi frequency inverter, 400 V three-phase, 1.5 kW and IP20.
Confidence: high
- www.radwell.ca — retrieved 2026-09-11; high confidence

Inferences

Inferred system position: the frequency inverter sits between the controller and motor in the KEB COMBIVERT F5 Multi chain.
Confidence: medium
Rationale: The exact-reference listing identifies a KEB COMBIVERT F5 Multi drive and states its three-phase 400 V, 1.5 kW and IP20 data; its controller-to-motor position is an inference.
- www.radwell.ca — retrieved 2026-09-11; high confidence

Unknowns

Unknown: installation-specific compatibility, firmware, condition, and replacement suitability are not established by the captured sources.
Confidence: low
Missing evidence: A confirmed installed-system configuration, revision, condition report, and replacement assessment.

System position diagram

Diagram showing 09.F5.A1A-3D2F between upstream equipment and downstream control or load. — System position inferred from the cited role and evidence.

View Mermaid source

flowchart LR\n  Upstream["Upstream equipment"] --> Component["09.F5.A1A-3D2F"]\n  Component --> Downstream["Downstream control or load"]

View diagram labels

Nodes: 09.F5.A1A-3D2F in the documented KEB COMBIVERT F5 Multi drive system; Downstream control or load
Edges: Evidence-backed system connection

Next action

Use this evidence-backed system role as a starting point; verify the installed revision and wiring before replacement.

Check the exact label, revision, and installation documentation before ordering.

Request help with this reference

Provide the exact reference, machine context, and observed symptom so the next review can stay evidence-based.

Submission is unavailable until durable storage is verified.

Reference or description *Recovery mode *Country *RegionEmail *Phone

I’m unsure of the exact reference or route; keep my description for human qualification.

Add context only if useful

ManufacturerMachine or lineComponent typeUrgencyProduction impactQuantityAcceptable conditionNeed byPreferred contact

Technical context

What is known so far?

Optional updatesNotify me when the supplier price changesSubscribe to the ardkor.org newsletter

This may be safety-sensitive or emergency-related; hold it for human handling.Allow anonymous landing and source categories to be saved with this request for analytics. This is optional and separate from routing.

Recipient and data disclosure

Named recipient: Ardkor human-qualification queue (internal local preview). No partner delivery is enabled here.

Data retained for this review: reference, selected route, location, technical context, contact details, consent state, and any accepted private attachment.

Response expectation: none is promised. If external routing is enabled later, the partner name, disclosed fields, and response expectation must be shown and accepted again.

Withdrawal and deletion: use the private request controls from the receipt to withdraw further processing or request access/deletion. The request remains recorded until the relevant Ardkor systems and any recipient confirm completion.

External routing consent: I separately authorize Ardkor to use this request for human qualification in the named internal queue. No external partner is authorized by this checkbox.

Read the privacy information before sending. For corrections, access, or deletion help, use the contact page or email reference@ardkor.org; mailbox delivery and attendance have not been verified.

This routing state is separate from watch, marketing, payment, and analytics choices. If no capable service match is found, the request remains a human-qualification lead and is never presented as provider acceptance. Ardkor is not an emergency or safety service and submission does not guarantee availability, price, repair, sourcing, or response.