Contact an expert
Menu

R88D-KN08H-ML2 - Omron G5 MECHATROLINK-II servo drive

Documented MECHATROLINK-II servo-drive role for R88D-KN08H-ML2, with source-backed evidence and explicit installation boundaries.

Documented function

Rebuilt from individual evidence

System position

Unknown: Evidence boundary

Omron lists R88D-KN08H-ML2 as a G5 AC servo drive with built-in MECHATROLINK-II communications for a 750 W motor.

The drive uses single-phase or three-phase 200 to 240 VAC main-circuit input.

The drive supports position, speed, and torque control modes.

The drive sits between the MECHATROLINK-II controller and the matched servo motor in the documented system.

The drive converts network motion commands into controlled electrical output for the motor.

Unknown: The installed controller configuration, motor pairing, firmware, and machine load are not established by the captured sources.

Exact reference
R88D-KN08H-ML2
Category
Drives / VFD
Evidence checked
2026-09-12

System role

This section explains what the product does and where it acts in the surrounding system.

Function
Controls the matched servo motor through MECHATROLINK-II motion commands.
System position
Sits between the MECHATROLINK-II controller and the matched servo motor.
Upstream / inputs
Receives MECHATROLINK-II motion commands and AC supply from the upstream system.
Downstream / outputs
Provides controlled electrical output to the matched servo motor.
Limitations
Unknown: The installed controller configuration, motor pairing, firmware, and machine load are not established by the captured sources.

Evidence ledger

Facts, inferences, and unknowns are kept separate.

Facts

  • Omron lists R88D-KN08H-ML2 as a G5 AC servo drive with built-in MECHATROLINK-II communications for a 750 W motor.

    Confidence: high

  • The drive uses single-phase or three-phase 200 to 240 VAC main-circuit input.

    Confidence: high

  • The drive supports position, speed, and torque control modes.

    Confidence: high

Inferences

  • The drive sits between the MECHATROLINK-II controller and the matched servo motor in the documented system.

    Confidence: medium

    Rationale: The manufacturer lineup and specification identify the communication interface and servo control role.

  • The drive converts network motion commands into controlled electrical output for the motor.

    Confidence: medium

    Rationale: The documented fieldbus interface and control modes support this system-level signal path.

Unknowns

  • Unknown: The installed controller configuration, motor pairing, firmware, and machine load are not established by the captured sources.

    Confidence: low

    Missing evidence: The installed controller configuration, motor pairing, firmware, and machine load are not established by the captured sources.

System position diagram

Diagram showing R88D-KN08H-ML2 between MECHATROLINK-II controller and Matched servo motor.

Reading limit: system position only, not a wiring or safety drawing.

System position of R88D-KN08H-ML2 from the captured evidence.

Enlarged system diagram

Diagram showing R88D-KN08H-ML2 between MECHATROLINK-II controller and Matched servo motor.

System position of R88D-KN08H-ML2 from the captured evidence.

View Mermaid source
flowchart LR
  upstream[MECHATROLINK-II controller] --> unit[R88D-KN08H-ML2]
  unit --> downstream[Matched servo motor]
View diagram labels
Nodes
MECHATROLINK-II controller; R88D-KN08H-ML2; Matched servo motor
Edges
Upstream control reaches the product; The product provides the documented downstream function

Next action

Decision: The captured evidence supports the documented MECHATROLINK-II servo-drive role for R88D-KN08H-ML2; verify the installed system before replacement.

Next action: Match the exact reference, controller or drive pairing, feedback arrangement, and site conditions against the cited documents before sourcing.

Request help with this reference

Request help with this reference

Provide the exact reference, machine context, and observed symptom so the next review can stay evidence-based.

Submission is unavailable until durable storage is verified.

Recovery request details
Add context only if useful
Optional updates
Recipient and data disclosure

Recipient and data disclosure

Named recipient: Ardkor human-qualification queue (internal local preview). No partner delivery is enabled here.

Data retained for this review: reference, selected route, location, technical context, contact details, consent state, and any accepted private attachment.

Response expectation: none is promised. If external routing is enabled later, the partner name, disclosed fields, and response expectation must be shown and accepted again.

Withdrawal and deletion: use the private request controls from the receipt to withdraw further processing or request access/deletion. The request remains recorded until the relevant Ardkor systems and any recipient confirm completion.

Read the privacy information before sending. For corrections, access, or deletion help, use the contact page or email reference@ardkor.org; mailbox delivery and attendance have not been verified.

This routing state is separate from watch, marketing, payment, and analytics choices. If no capable service match is found, the request remains a human-qualification lead and is never presented as provider acceptance. Ardkor is not an emergency or safety service and submission does not guarantee availability, price, repair, sourcing, or response.